A driveway is more than just a place to park your car. A nicely paved, professional looking driveway can make your home seem more inviting. Plus, it allows you to park so that you are situated closer to your home, which is convenient if you come home late at night, after a long day at work, or with a trunk full of groceries. Considering how beneficial your driveway is, it only makes sense to prolong its lifespan, which you can easily do.
Seal the Deal with Sealant
Asphalt driveways may crack and chip as time goes by. From the weight of a heavy vehicle parked on the driveway day in and day out to elemental exposure and fluctuations in temperature, there are a number of reasons why your driveway experiences problems. In fact, the average weight of a vehicle in 2003 was around 4,021 pounds. When you think about it, your driveway really takes a beating.
One way to prolong the life of your driveway is to apply a seal coat layer to it. The layer of sealant prevents cracking and chipping, or it can fill in cracks and chips to prevent the problem from spreading.
The average lifespan of an asphalt driveway ranges from 15 to 20 years. Thankfully, a layer of seal coat can add years to the life of your driveway.
Tips for Applying Sealant
Weather: It is recommended that you wait approximately 90 days from the time you have your asphalt driveway installed before you apply a layer of sealant. Make sure you choose a dry, warm day.
Although the level of humidity does not affect your seal coat, rain and cool temperatures may leave you with a less than desirable looking driveway. Therefore, it is best to apply a seal coat while the temperature is above 45 degrees.
Clothing: Sealant is both black and sticky. Applying sealant to your driveway is a messy job probably best featured on Mike Rowe's Dirty Jobs. That is why it is highly recommended that you wear old clothes, coveralls, or disposable clothing.
Do not wear something that you would mind getting dirty. An old pair of shoes or boots is also recommended.
Preparation: Make sure you clean your driveway before you apply the sealant. Oils, dirt, and debris found on your driveway can ruin the layer of sealant and your driveway, which can lead to costly repairs. Use a pressure washer and a push broom to thoroughly clean your driveway to remove all dirt, debris, oil, and other stains.
You can use a mild detergent if you would like to further ensure the cleanliness of your driveway. Your driveway can be damp before you apply the sealant. In fact, a semi-damp driveway is recommended.
Another preparation step you need to take is filling in all cracks and chips. Use the sealant in areas with cracks and chips. If you fail to follow this step, your seal coat will not go on evenly, therefore ruining the look of your driveway.
You will also need to prep your materials before you apply the sealant. Mix your sealant first so that it offers a consistent color when applied. Your best bet is to turn the buckets of sealant upside down approximately two days before you are ready to use them in order to mix them.
Application: Make sure you always work in small areas. Dump some of the sealant on to the driveway and work it over the driveway using a squeegee. Make sure you keep the coat of sealant relatively thin. Apply the first layer across the driveway either horizontally or vertically and let it dry for approximately 12 hours..
Once the first layer of sealant dries, apply a second layer. Make sure the second layer is also just a thin layer. If you applied your first coat horizontally, lay the second coat vertically. Make sure you allow the sealant to try for about 24 hours before your park your car on the driveway.
If you find that your driveway is in need of desperate repair or you would rather not take on the messy task of applying a seal coat, talk to a professional. A professional can provide you with a uniformed, gorgeous looking asphalt driveway for your home.
Visit a site like http://www.lakeridgepaving.com for more information.